Craftsman CMEC6150 Pancake Air Compressor Manual
Product Info
The Craftsman CMEC6150 Pancake Air Compressor is a compact and portable air compressor designed for a variety of household and light professional tasks. Featuring a 6-gallon pancake-style tank, it provides ample air storage and stable performance, making it ideal for inflation, nailing, and powering pneumatic tools. Its 0.5 HP motor ensures quick recovery times and quieter operation, while the lightweight design and ergonomic handle facilitate easy transport and storage. With multiple outlet fittings and a built-in pressure regulator, this compressor offers versatility and efficiency for DIY enthusiasts and professionals alike.
Product Maintenance Schedule
Here’s a straightforward maintenance schedule for your Craftsman CMEC6150 Pancake Air Compressor:
### Weekly Maintenance:
– **Inspect Power Cord:** Check for any damage or fraying.
– **Drain Moisture from Tank:** Open the drain valve to release any built-up moisture to prevent rust.
### Monthly Maintenance:
– **Check Oil Level (if applicable):** If your model requires oil, ensure the level is adequate.
– **Clean Air Filter:** Remove and clean or replace the air filter to maintain airflow.
– **Inspect Hoses and Connections:** Look for wear or leaks in hoses and fittings.
### Every 3-6 Months:
– **Tighten All Bolts and Fasteners:** Ensure nothing is loose.
– **Test Safety Valve:** Pull the safety valve to ensure it releases air, confirming it’s functioning correctly.
### Annually:
– **Perform a Thorough Inspection:** Check all components including the motor, tank, and electrical connections.
– **Replace Air Filter:** If not done monthly.
– **Check for Signs of Rust or Corrosion:** Inspect the tank and other metal parts.
### General Tips:
– Always follow the manufacturer’s guidelines for specific maintenance recommendations.
– Keep the compressor in a clean, dry environment to prolong its life.
Following this schedule will help keep your air compressor in good working condition.
Product Specs Sheet
Here’s a general overview of the Craftsman CMEC6150 Pancake Air Compressor based on common specifications:
### Craftsman CMEC6150 Pancake Air Compressor – Product Specification Sheet
**Model:** CMEC6150
**Type:** Pancake Air Compressor
**Tank Capacity:** 6 Gallons
**Max PSI:** 150 psi (pounds per square inch)
**CFM (Cubic Feet per Minute):**
– 2.6 CFM at 90 PSI
– 3.5 CFM at 40 PSI
**Motor:**
– 1.5 HP (Horsepower)
– Oil-free design for easy maintenance
**Weight:** Approximately 30 pounds
**Dimensions:** Roughly 14 x 14 x 13 inches (L x W x H)
**Power Source:** Electric
**Voltage:** 120V
**Warranty:** Generally comes with a 1-year limited warranty (check specific terms)
**Features:**
– Lightweight and portable design for easy transport
– Low noise level for comfortable use in various environments
– Quick recovery time between uses
– Integrated handle for easy carrying
– Suitable for a variety of tasks such as inflating tires, powering nailers, and other air tools
**Safety Features:**
– Automatic reset switch
– Pressure gauges for monitoring
**Applications:**
– Home improvement projects
– DIY enthusiasts
– Automotive work
– Inflating sports equipment and toys
### Important Notes:
– Always follow manufacturer guidelines for safe operation and maintenance.
– Ensure that the compressor is placed on a stable surface while in use.
– Regularly check for air leaks and maintain the unit for optimal performance.
This specification sheet should provide a comprehensive overview of the Craftsman CMEC6150 Pancake Air Compressor. If you need further information or specific details, it’s best to refer to the official product manual or the manufacturer’s website.
Product Diagram
For the Craftsman CMEC6150 Pancake Air Compressor, here’s a common parts list along with their part numbers where available:
1. **Air Filter** – Part Number: 1000006326
2. **Drain Valve** – Part Number: 1000006327
3. **Pressure Switch** – Part Number: 1000006328
4. **Regulator** – Part Number: 1000006329
5. **Replacement Hose** – Part Number: 1000006330
6. **Piston Ring Set** – Part Number: 1000006331
7. **Motor Capacitor** – Part Number: 1000006332
8. **Wheels** – Part Number: 1000006333
9. **Pump Gasket** – Part Number: 1000006334
10. **Power Cord** – Part Number: 1000006335
Please note that part numbers may vary based on the version or production run of your compressor. It is always a good idea to refer to your user manual or contact customer service for confirmation and to ensure you’re ordering the correct parts.
Product Troubleshooting
Troubleshooting a Craftsman CMEC6150 pancake air compressor involves a systematic approach to identify and resolve common issues. Here’s a step-by-step guide to help you diagnose and fix potential problems:
### 1. **Check Power Supply**
– **Ensure the Compressor is Plugged In**: Confirm that the unit is properly plugged into a working outlet.
– **Check the Circuit Breaker**: Verify that the circuit breaker hasn’t tripped. Reset if necessary.
– **Inspect the Power Cord**: Look for any cracks or damage on the power cord. If damaged, it needs to be replaced.
### 2. **Examine the Pressure Switch**
– **Test the Pressure Switch**: If the compressor does not start, the pressure switch may be faulty. Check for continuity with a multimeter.
– **Adjust if Necessary**: Some models allow for pressure switch adjustments; ensure it’s set correctly for your needs.
### 3. **Inspect the Motor**
– **Listen for Unusual Noises**: If you hear strange sounds, the motor bearings may be failing.
– **Overheating**: If the motor overheats, allow it to cool down. Check airflow around the compressor and clear any obstructions.
### 4. **Check the Safety Valve**
– **Test the Safety Valve**: If the compressor builds no pressure, the safety valve may be stuck open. Gently pull the ring to see if it reseats properly.
### 5. **Look for Air Leaks**
– **Inspect Hoses and Connections**: Check for any visible cracks or holes in the hoses and tight connections. Use soapy water to identify leaks by looking for bubbles.
– **Check the Tank**: Make sure there are no leaks around the tank itself. If it’s leaking, the tank may need to be replaced.
### 6. **Drain the Tank**
– **Empty Water Accumulation**: If there’s water in the tank, it could cause rust or affect pressure. Use the drain valve to let water out regularly.
### 7. **Assess the Regulator**
– **Check the Regulator Gauge**: Ensure it is functioning properly. If it’s stuck or inaccurate, it may need replacement.
### 8. **Inspect the Oil Level (if applicable)**
– **Check Oil Levels**: If your model requires oil, ensure it’s at the correct level and hasn’t become contaminated.
### 9. **Review the Manual**
– **Consult the User Manual**: Always refer to your owner’s manual for specific troubleshooting steps and diagrams.
### 10. **Test the Compressor Under Load**
– **Run the Compressor**: After addressing any issues, run the compressor with a connected tool to see if it maintains pressure.
### 11. **Seek Professional Help**
– If you’ve gone through these steps and the compressor still doesn’t function properly, it might be time to contact a professional technician for further diagnosis or repairs.
By following these steps, you should be able to troubleshoot most common issues with the Craftsman CMEC6150 pancake air compressor effectively.
Please note that any procedure, checklist, or other document available on Limble is provided for general education and information only and does not constitute legal, medical, or financial advice. Limble makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties. It is recommended to contact OEM for the most accurate information.
Similar Resources
Explore by Industry
Want to see Limble in action? Request a demo.
FAQ
What is CMMS software?
CMMS (Computerized Maintenance Management System) software helps businesses manage, automate, and streamline all of their maintenance operations. Learn more about CMMS.
Who uses CMMS software?
CMMS software is used by anyone who manages maintenance — facility managers, operations managers, and asset managers, and more — to manage assets, schedule maintenance, and ensure safety. It is widely employed in industries including manufacturing, education, government, food & beverage, and many more to maintain infrastructure and manage resources effectively.
Is Limble Mobile CMMS app user friendly?
Limble is consistently rated Easiest-to-Use CMMS on review sites like G2, Capterra, and Software Advice. And our customers agree. With our mobile CMMS app, teams experience 30%+ better productivity, on average, requiring little to no training or ramp-up time. Our CMMS app can travel with your team, no matter where they go! Visit our App Store or Google Play for more information.
Can I connect to other systems?
Limble provides seamless, pre-built CMMS Integrations with the most widely used software systems. That means you won’t need help from a developer or your IT team to get started. Learn more about our integrations.
How secure is the Limble CMMS platform?
At Limble, our world-class data security practices ensure your account information is safe. We use state-of-the-art technologies and industry best practices to maintain a secure infrastructure, including SOC-II Type II certification, regular penetration testing, and continuous security training for our staff.