DeWalt DW745 Table Saw Manual

Here’s a short and simple maintenance schedule for the DeWalt DW745 Table Saw:

### Daily Maintenance
– **Clean the Surface**: Wipe down the table and fence with a clean cloth to remove dust and debris.
– **Inspect the Blade**: Check for any damage or excessive wear.

### Weekly Maintenance
– **Dust Collection**: Empty the dust bag or collection bin to prevent clogging.
– **Tighten Fasteners**: Check and tighten any loose screws or bolts on the saw.

### Monthly Maintenance
– **Blade Alignment**: Ensure the blade is properly aligned and adjust if necessary.
– **Lubricate Moving Parts**: Apply lubricant to any moving parts according to the manufacturer’s recommendations.

### Quarterly Maintenance
– **Check the Motor**: Inspect the motor for dust accumulation and clean if necessary.
– **Replace the Blade**: If the blade is dull or damaged, replace it for optimal performance.

### Annual Maintenance
– **Thorough Inspection**: Conduct a full inspection of all components, including electrical parts and safety features.
– **Professional Service**: Consider having a professional technician service the saw for any potential issues.

### Additional Tips
– Always refer to the user manual for specific maintenance instructions and recommendations.
– Use proper safety gear during maintenance activities.

Following this schedule will help keep your DeWalt DW745 Table Saw in good working condition.

Here’s a common parts list for the DeWalt DW745 Table Saw along with their part numbers where available:

1. **Table Saw Blade** – Part Number: DWE7491RS
2. **Arbor Assembly** – Part Number: 610004-00
3. **Table Insert** – Part Number: 5140127-32
4. **Rip Fence** – Part Number: 5140015-38
5. **On/Off Switch** – Part Number: 610030-00
6. **Motor (15 Amp)** – Part Number: 5140184-36
7. **Blade Guard Assembly** – Part Number: 5140006-50
8. **Dust Port** – Part Number: 5140137-00
9. **Base Assembly** – Part Number: 5140124-06
10. **Table Assembly** – Part Number: 5140132-38

For any repairs or replacements, it’s always good to verify the part numbers with your local supplier or DeWalt’s official resources, as they may vary based on the production year or specific model variations.

Here’s a brief product spec sheet for the DeWalt DW745 Table Saw:

**Model:** DeWalt DW745

**Type:** Portable Jobsite Table Saw

**Motor:**
– Power: 15 Amp
– Speed: 3,850 RPM

**Blade:**
– Diameter: 10 inches
– Arbor Size: 5/8 inch
– Blade Type: Carbide-tipped
– Maximum Depth of Cut at 90°: 3-1/8 inches
– Maximum Depth of Cut at 45°: 2-1/4 inches

**Table Size:**
– Dimensions: 20 inches x 26 inches
– Material: Aluminum

**Rip Capacity:**
– Right of Blade: 20 inches
– Left of Blade: 12 inches

**Weight:**
– Approximately 48 lbs (21.77 kg)

**Features:**
– Rack and pinion telescoping fence system for accurate cuts
– Durable steel construction for stability
– Onboard storage for accessories
– 2″ dust collection port for cleaner work environment
– Electronic overload protection

**Power Source:** Electric

**Warranty:** 3-year limited warranty

This table saw is known for its portability and precision, making it suitable for both professional and hobbyist woodworkers. Always refer to the official DeWalt website or user manual for the most accurate and detailed specifications.

Troubleshooting a DeWalt DW745 table saw can be straightforward if you follow a systematic approach. Here are some steps you can take to identify and resolve common issues:

### 1. **Check the Power Supply**
– **Verify the Outlet:** Ensure the saw is plugged into a functioning outlet. Test the outlet with another device.
– **Power Cord:** Inspect the power cord for any signs of damage or fraying. If damaged, it needs to be replaced.
– **Reset Switch:** Some models have a reset button that may need to be pressed if the saw has tripped.

### 2. **Blade Inspection**
– **Blade Condition:** Check if the blade is dull or damaged. A dull blade can cause poor cutting performance. Replace if necessary.
– **Blade Alignment:** Ensure the blade is parallel to the miter gauge and the table. Misalignment can lead to inaccurate cuts.

### 3. **Table and Fence Adjustment**
– **Flatness of Table:** Make sure the tabletop is flat and free of debris. Clean the table if necessary.
– **Fence Alignment:** The rip fence should be parallel to the blade. Adjust it if it’s not aligned properly for accurate cuts.

### 4. **Motor and Drive Belt**
– **Motor Function:** Listen for unusual noises when powered on. If the motor is humming but not spinning, it may need a new capacitor.
– **Belt Condition:** Inspect the drive belt for wear or damage. Replace if it appears frayed or loose.

### 5. **Switch and Safety Features**
– **On/Off Switch:** Test the switch for functionality. If it feels sticky or doesn’t engage smoothly, it might need lubrication or replacement.
– **Safety Features:** Ensure the blade guard, riving knife, and other safety features are properly installed and functioning.

### 6. **Cut Quality**
– **Feed Rate:** Make sure you are feeding the material at the correct speed. Too fast or too slow can affect cut quality.
– **Wood Type:** Some hardwoods or engineered wood can be more challenging to cut. Verify the blade type is suitable for the material.

### 7. **Vibration and Noise**
– **Stability:** Ensure the saw is on a stable surface. Uneven ground or an unstable work surface can cause excessive vibration.
– **Loose Parts:** Check for any loose screws or components that may need tightening.

### 8. **Consult the Manual**
– If you’ve tried all the above and the issue persists, consult the user manual for troubleshooting tips specific to your model.

### 9. **Professional Help**
– If you’re unable to resolve the issue after following the above steps, consider contacting a professional technician for assistance.

By systematically following these troubleshooting steps, you should be able to diagnose and fix many common issues with the DeWalt DW745 table saw. Always prioritize safety when working with power tools.