DeWalt DWFP55130 Air Compressor Manual

Here’s a short and simple maintenance schedule for the DeWalt DWFP55130 Air Compressor:

### Daily Maintenance
– **Drain the Tank:** Open the drain valve to remove any accumulated moisture.
– **Inspect Hoses and Fittings:** Check for any visible damage or leaks.

### Weekly Maintenance
– **Check Oil Level:** If applicable, check the oil level and add oil if needed.
– **Clean Air Filter:** Remove and clean the air filter to ensure proper airflow.

### Monthly Maintenance
– **Inspect Power Cord and Plug:** Check for any wear or damage.
– **Test Safety Features:** Ensure that safety features (like the pressure relief valve) are functioning properly.

### Every 6 Months
– **Replace Air Filter:** If the filter is dirty or damaged, replace it.
– **Inspect and Tighten Bolts:** Check all mounting bolts and screws to ensure they are secure.

### Annually
– **Service by a Professional:** Consider an annual professional inspection for wear and tear beyond basic maintenance.

By following this schedule, you can help ensure your DeWalt DWFP55130 Air Compressor remains in good working condition.

The DeWalt DWFP55130 is a versatile and efficient air compressor designed for both professional and DIY use. Here’s a product spec sheet outlining its key features and specifications:

### DeWalt DWFP55130 Air Compressor Spec Sheet

**Model:** DWFP55130
**Type:** Pancake Air Compressor

#### Specifications:
– **Power Source:** Electric
– **Max PSI:** 135 PSI
– **Tank Capacity:** 6.0 gallons
– **CFM (Cubic Feet per Minute) @ 90 PSI:** 2.6 CFM
– **CFM @ 40 PSI:** 3.2 CFM
– **Pump:** Oil-free
– **Weight:** Approximately 30 lbs
– **Dimensions:** 20 x 20 x 20 inches (approx.)

#### Features:
– **Low Noise Level:** Operates at 71 dBA, making it quieter than many comparable models.
– **Portability:** Lightweight design with a handle for easy transport.
– **Durability:** Made with a robust design resistant to wear and tear, suitable for job sites.
– **Easy Maintenance:** Oil-free pump requires minimal maintenance.
– **Convenient Controls:** Easy-to-read gauges and a quick-connect coupler for efficient operation.
– **Power Cord:** 25-foot power cord for extended reach.

#### Applications:
– Ideal for powering nail guns, inflating tires, and other pneumatic tools.
– Suitable for home improvement projects, woodworking, and small construction tasks.

#### Warranty:
– Manufacturer’s limited 1-year warranty.

### Additional Information:
– **Safety Features:** Includes a thermal overload protector to prevent overheating.
– **Accessories:** Often sold with accessories such as a hose and fittings, though these may vary by retailer.

This air compressor is known for its efficiency and reliability, making it a popular choice for users looking to handle a variety of tasks with ease. Always refer to the manufacturer’s manual for detailed operational instructions and safety guidelines.

For the DeWalt DWFP55130 air compressor, here is a list of common replacement parts along with their part numbers:

1. **Pump Assembly** – D55130
2. **Pressure Switch** – D55130
3. **Motor** – D55130
4. **Air Filter** – 5140158-18
5. **Replaceable Hose** – D55130
6. **Regulator** – 5140197-01
7. **Check Valve** – 5140142-01
8. **Pressure Gauge** – 5140143-01
9. **Safety Valve** – 5140145-01
10. **Vibration Isolator** – 5140199-01

Always verify the part numbers with the official DeWalt parts list or manual to ensure compatibility and correctness, as part numbers can vary based on the production year or specific model variations.

Troubleshooting a DeWalt DWFP55130 Air Compressor involves several steps to identify and resolve common issues. Here’s a guide to help you through the process:

### 1. **Check the Power Supply**
– **Ensure the compressor is plugged in**: Make sure it’s securely connected to a functioning outlet.
– **Inspect the power cord**: Look for any visible damage, frays, or cuts.
– **Check the circuit breaker**: Ensure the circuit breaker hasn’t tripped.
– **Test the outlet**: Plug another device into the outlet to confirm it is working properly.

### 2. **Inspect the Pressure Switch**
– **Ensure the pressure switch is set correctly**: Check the cut-in and cut-out pressure settings. Adjust them if necessary.
– **Listen for the switch operation**: When the tank is empty, the switch should activate to start the compressor.

### 3. **Look for Air Leaks**
– **Inspect fittings and hoses**: Check for loose connections or damaged hoses that could cause air leaks.
– **Use soapy water**: Spray a mixture of soapy water on suspected areas and look for bubbling.

### 4. **Check the Tank and Drain Valve**
– **Inspect the air tank**: Look for rust or damage that could compromise its integrity.
– **Drain the tank**: Be sure to regularly drain it to prevent moisture buildup and corrosion.

### 5. **Examine the Regulator**
– **Check the regulator settings**: Ensure it’s delivering the correct pressure to your tools.
– **Test the regulator’s functionality**: If it’s not adjusting properly, it may need replacement.

### 6. **Review the Safety Features**
– **Check the safety valve**: Ensure it’s not stuck and is functioning properly.
– **Reset the thermal overload protection**: If the compressor has overheated, it may have tripped. Allow it to cool down before resetting.

### 7. **Listen for Unusual Noises**
– **Identify any strange sounds**: Unusual noises like loud banging or grinding could indicate internal issues.
– **Check for vibration**: Make sure the compressor is on a stable surface.

### 8. **Monitor Performance**
– **Check for pressure build-up**: Monitor if the compressor is reaching its cut-out pressure.
– **Look for continuous running**: If the compressor runs without stopping, it might indicate a leak or malfunctioning pressure switch.

### 9. **Maintenance Checks**
– **Clean or replace air filters**: Dirty filters can impair performance.
– **Oil check (if applicable)**: If your model requires oil, ensure it’s at the correct level.

### 10. **Consult the Manual**
– **Refer to the user manual**: It contains specific troubleshooting steps and guidance for your model.

If you’ve gone through these steps and the compressor is still not functioning correctly, it may be necessary to seek professional repair or contact DeWalt customer support for further assistance.