Daikin FTX and FTXN Series Air Conditioner Manual

CREATE FREE TEMPLATE

Product Info

The Daikin FTX and FTXN Series Air Conditioners are advanced ductless split systems designed for efficient cooling and heating in residential and commercial spaces. Featuring a sleek and modern design, these units offer quiet operation, a range of energy-saving modes, and customizable temperature settings to ensure optimal comfort. With advanced air filtration technology and smart control options, including Wi-Fi compatibility, the FTX and FTXN series are ideal for maintaining a pleasant indoor environment while minimizing energy consumption and operating costs.

Product Maintenance Schedule

Here’s a concise maintenance schedule for Daikin FTX and FTXN Series Air Conditioners:

### Monthly Maintenance:
1. **Inspect and Clean Filters:**
– Check air filters for dust and debris.
– Clean or replace filters if needed.

### Quarterly Maintenance:
2. **Check Outdoor Unit:**
– Clear any debris around the outdoor unit.
– Ensure there’s proper airflow.

3. **Inspect Drain Line:**
– Check for clogs in the condensate drain line.
– Clean if necessary to prevent water overflow.

### Bi-Annual Maintenance:
4. **Check Refrigerant Levels:**
– Ensure refrigerant is at the correct level.
– Look for any signs of leaks.

5. **Inspect Electrical Components:**
– Check connections and wiring for wear.
– Tighten loose connections.

### Annual Maintenance:
6. **Professional Inspection:**
– Schedule a comprehensive yearly service with a qualified technician.
– Include a full system check, cleaning of coils, and overall performance evaluation.

### General Tips:
– Keep the area around the unit clear.
– Monitor the system for unusual noises or performance issues.

By following this schedule, you can keep your Daikin air conditioner running efficiently and extend its lifespan.

Product Specs Sheet

Certainly! The Daikin FTX and FTXN Series Air Conditioners are designed for both efficiency and comfort. Here’s a general product specification sheet that outlines the key features and specifications of these units:

### Daikin FTX and FTXN Series Air Conditioners Specification Sheet

#### General Features:
– **Type:** Wall-mounted split air conditioner
– **Cooling Capacity:** Range from approximately 9,000 BTU/h to 24,000 BTU/h (varies by model)
– **Heating Capacity:** Range from approximately 10,000 BTU/h to 28,000 BTU/h (varies by model)
– **Energy Efficiency Ratio (EER):** High SEER ratings, typically between 15 to 23
– **Refrigerant:** R-32 (more environmentally friendly with a lower global warming potential)

#### Technical Specifications:
– **Power Supply:** Typically 208/230V, 1-phase, 60Hz
– **Airflow Rate:** Variable airflow depending on model, generally between 400 to 1,200 CFM
– **Indoor Unit Dimensions (H x W x D):** Varies by model, generally between 11.8″ to 13.7″ in height and 30.4″ to 37.9″ in width
– **Outdoor Unit Dimensions (H x W x D):** Dimensions vary but typically around 30″ in height, 30″ in width, and 12″ in depth

#### Features:
– **Inverter Technology:** Ensures efficient operation by adjusting the compressor speed based on cooling or heating demands.
– **Multi-Zone Capability:** Some models allow for multiple indoor units to be connected to a single outdoor unit.
– **Quiet Operation:** Indoor and outdoor units are designed for low noise levels, enhancing comfort.
– **Air Purification:** Advanced filters and air purification systems to improve indoor air quality.
– **Wi-Fi Capability:** Some models come with integrated Wi-Fi for remote control via smartphone apps.
– **Smart Home Compatible:** Works with various smart home systems for added convenience.

#### Controls:
– **Remote Control:** Most models include an easy-to-use remote control with programmable timers and settings.
– **Wired Controller:** Option for a wired wall-mounted controller for fixed installations.
– **Auto Restart:** Automatically resumes operation after a power outage with previously set configurations.

#### Certifications:
– **Energy Star Rated:** Many models meet Energy Star guidelines for energy efficiency.
– **AHRI Certified:** Certified performance ratings for reliable specifications.

#### Installation:
– **Type:** Split system (indoor and outdoor units)
– **Refrigerant Line Length:** Varies by model, typically between 15 to 50 feet
– **Drainage System:** Easy installation with integrated drainage solutions.

#### Maintenance:
– **Easy Filter Access:** Removable and washable filters for straightforward maintenance.
– **Self-Diagnosis:** Advanced diagnostic features for quick troubleshooting.

### Note:
Specifications may vary by model and region. Always refer to the specific model’s user manual or Daikin’s official website for the most accurate and detailed specifications.

If you have any specific questions or need further details about a particular model, feel free to ask!

Product Diagram

For Daikin FTX and FTXN series air conditioners, here are some common replacement parts along with their typical part numbers. Keep in mind that part numbers can vary based on specific models and production years, so it’s always best to verify with the manufacturer or refer to the service manual for your exact model.

1. **Remote Control** – Part Number: **RM-FTX**
2. **Air Filter** – Part Number: **K004A120**
3. **PCB (Printed Circuit Board)** – Part Number: **PCB120B**
4. **Fan Motor** – Part Number: **3D08039**
5. **Compressor** – Part Number: **DCP28D2**
6. **Thermistor** – Part Number: **K7500149**
7. **Drain Pump** – Part Number: **K8024211**
8. **Control Panel** – Part Number: **K6600087**
9. **Expansion Valve** – Part Number: **K5360201**
10. **Refrigerant Line** – Part Number: Varies by length and diameter; typically requires custom specification.

Remember to always check the model-specific documentation to confirm compatibility and specifications when ordering replacement parts.

Product Troubleshooting

Troubleshooting a Daikin FTX and FTXN Series Air Conditioner involves a systematic approach to identify and resolve common issues. Here are some steps to guide you through the process:

### 1. **Check the Power Supply**
– Ensure the unit is plugged in and the circuit breaker hasn’t tripped.
– Verify that the remote control has fresh batteries and is functioning.

### 2. **Inspect the Thermostat Settings**
– Confirm that the thermostat is set to the desired temperature and mode (cool, heat, or fan).
– Check for any settings that might restrict operation, such as “Eco” mode.

### 3. **Examine the Air Filters**
– Dirty air filters can restrict airflow and cause the unit to not function effectively.
– Remove and clean or replace the filters as needed.

### 4. **Check for Blocked Vents**
– Ensure that all air vents are unobstructed and that furniture or drapes are not blocking airflow.

### 5. **Inspect Outdoor Unit**
– Make sure the outdoor unit is clear of debris, such as leaves or trash, which can impact performance.
– Check for ice buildup on the coils, especially during cooling operation.

### 6. **Listen for Unusual Noises**
– Pay attention to any unusual sounds, such as rattling, grinding, or buzzing, which could indicate a mechanical issue.

### 7. **Review Error Codes**
– If the unit displays error codes, refer to the user manual to understand the meaning of the codes and recommended actions.

### 8. **Check Drainage**
– Ensure the condensate drain is not clogged. A blocked drain can lead to water leaks and impact performance.

### 9. **Test the Remote Control**
– If the unit isn’t responding, use the remote control buttons to test functionality; check for any stuck buttons.

### 10. **Reboot the System**
– Turn the unit off, wait a few minutes, and then turn it back on to reset the system.

### 11. **Consult the User Manual**
– Refer to the specific user manual for your model for troubleshooting tips and detailed operational guidance.

### 12. **Professional Service**
– If the problem persists after these troubleshooting steps, consider contacting a professional technician for further diagnosis and repair.

Remember, safety is paramount, so always ensure the power is turned off when performing maintenance tasks.

Please note that any procedure, checklist, or
other document available on Limble is provided for general education and information only and does not constitute legal,
medical, or financial advice. Limble makes the materials available AS IS and AS PROVIDED, without warranties of any
kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific
situation and agree that you are solely responsible for any such use, including compliance with applicable law and with
meeting any conditions of product warranties. It is recommended to contact OEM for the most accurate
information.

Configure and custumize to fit your needs

  • Reduce downtime

    Increase Productivity

    Prioritize and complete work orders faster with efficient, collaborative software your team will love using.

  • Compliance and audits

    Reduce Downtime

    Avoid setbacks with a proactive, preventive maintenance strategy and move fast when emergencies do happen.

  • See every work order

    World Class Support

    Limble’s support team is ready to answer any questions you have in 60 seconds or less, 24/7.

Want to see Limble in Action?

FAQs

Why are Standard Operating Procedures (SOP) Important?

SOPs ensure consistency, efficiency, and safety by providing clear guidelines for tasks. They streamline training, maintain quality, ensure compliance, and support continuous improvement and accountability.

What is CMMS?

CMMS stands for Computerized Maintenance Management System. CMMS software helps businesses manage, automate, and streamline all of their maintenance operations.

Is Limble’s CMMS Mobile Friendly?

Limble is consistently rated Easiest-to-Use CMMS on review sites like G2, Capterra, and Software Advice. And our customers agree. With our mobile CMMS app, teams experience 30%+ better productivity, on average, requiring little to no training or ramp-up time. Our CMMS app can travel with your team, no matter where they go! Visit our App Store or Google Play for more information.

Integration

Limble provides seamless, pre-built CMMS Integrations with the most widely used software systems. That means no help from a developer or your IT team is required. Learn more about our integrations.

Security

At Limble, our world-class data security practices ensure your account information is safe. We use state-of-the-art technologies and industry best practices to maintain a secure infrastructure, including SOC-II Type II certification, regular penetration testing, and continuous security training for our staff.

Request a Demo

Share your contact details below and someone from our team will reach out as soon as possible.