Toro TimeCutter SS 4225 Zero Turn Mower Manual

CREATE FREE TEMPLATE

Product Info

The Toro TimeCutter SS 4225 is a robust zero-turn mower designed for residential lawns, featuring a 42-inch cutting deck that allows for efficient maneuverability around obstacles. Powered by a dependable 22 horsepower Kohler engine, it combines power and performance with user-friendly controls for easy operation. Its dual hydrostatic transmission provides smooth, precise handling, while the innovative Smart Speed control system allows users to choose the right speed for the task, enhancing both speed and safety. With its durable construction and comfort features, the TimeCutter SS 4225 is ideal for homeowners looking to achieve a professional-looking lawn with minimal effort. Download the Manual

Product Maintenance Schedule

Here’s a short and simple maintenance schedule for your Toro TimeCutter SS 4225 Zero Turn Mower:

### Daily Maintenance:
– **Check Oil Level:** Ensure the oil level is adequate.
– **Inspect Fuel Level:** Keep the fuel tank at least half full.
– **Clean Debris:** Remove any grass, leaves, or debris from the mower deck and underside.
– **Check Tire Pressure:** Ensure tires are properly inflated.

### Every 25 Hours:
– **Change Engine Oil:** Replace with fresh oil.
– **Replace Oil Filter:** If applicable, change the oil filter.
– **Clean Air Filter:** Inspect and clean the foam pre-filter if equipped.

### Every 50 Hours:
– **Sharpen Mower Blades:** Keeping blades sharp ensures a clean cut.
– **Check Belts and Cables:** Inspect for wear and adjust if necessary.
– **Grease Fittings:** Lubricate grease fittings on spindles and wheel bearings.

### Every 100 Hours:
– **Replace Spark Plug:** A new spark plug ensures better engine performance.
– **Change Fuel Filter:** Keep your fuel system clean.
– **Check Battery:** Inspect terminals for corrosion and ensure a secure connection.

### Annually:
– **Service Fuel System:** Clean or replace fuel lines and inspect the fuel tank.
– **Check and Adjust Deck Leveling:** Ensure the cutting deck is level for an even cut.
– **Inspect Overall Condition:** Check for wear on belts, cables, and other components.

Following this schedule will help keep your Toro TimeCutter running efficiently and extend its lifespan. Always refer to your owner’s manual for specific recommendations and safety instructions.

Product Specs Sheet

The Toro TimeCutter SS 4225 is a robust zero-turn mower designed for efficient lawn maintenance. Below is a product spec sheet that outlines its primary features and specifications:

### Toro TimeCutter SS 4225 Zero Turn Mower

**Engine:**
– Type: Kohler 7000 Series V-Twin
– Displacement: 725 cc
– Horsepower: 22 HP
– Fuel Capacity: 3 gallons

**Mower Deck:**
– Deck Size: 42 inches
– Deck Material: 12-gauge steel
– Cutting Height: Adjustable (1.5” to 4.5”)
– Blades: (2) 21″ blades

**Transmission:**
– Type: Hydrostatic
– Drive System: Dual hydrostatic transmission for smooth operation and responsiveness

**Performance:**
– Top Speed: Up to 7 mph forward and 3 mph in reverse
– Turning Radius: Zero turn capability for maneuverability
– Cutting Speed: Up to 4.5 acres per hour

**Features:**
– Easy to use control system with ergonomic controls
– Comfortable high-back seat for reduced fatigue
– Large rear tires for stability and traction
– Armrest for added comfort during operation
– Deck washout port for easy cleaning of the mower deck

**Dimensions:**
– Overall Length: 68.5 inches
– Overall Width: 48 inches
– Overall Height: 42 inches
– Weight: Approximately 510 lbs

**Warranty:**
– Engine Warranty: 3 years
– Mower Warranty: 3 years residential use

**Optional Accessories:**
– Mulching kit
– Bagging system
– Front bumper
– LED lights for evening mowing

This spec sheet provides a comprehensive overview of the Toro TimeCutter SS 4225, focusing on its engine performance, cutting capabilities, and user-friendly features. Always refer to the official Toro documentation or your local dealer for the most current and detailed information.

Product Diagram

While specific part numbers can vary by dealer or region, here is a common parts list for the Toro TimeCutter SS 4225 Zero Turn Mower that you may find useful:

1. **Air Filter** – Toro part number: 120-7919
2. **Oil Filter** – Toro part number: 120-2020
3. **Spark Plug** – Toro part number: 100-2455
4. **Blades** – Toro part number: 115-4000
5. **Fuel Filter** – Toro part number: 120-2420
6. **Battery** – Toro part number: 105-0450
7. **Deck Belt** – Toro part number: 117-1814
8. **Drive Belt** – Toro part number: 117-1816
9. **Tires (Front)** – Toro part number: 110-1991
10. **Tires (Rear)** – Toro part number: 110-1992

It’s best to verify these part numbers with your local Toro dealer or check the user manual for the most accurate and specific information tailored to your mower’s model.

Product Troubleshooting

Troubleshooting a Toro TimeCutter SS 4225 Zero Turn Mower involves a systematic approach to identify and resolve issues. Here are some common problems and steps to troubleshoot:

### 1. **Mower Won’t Start**
– **Check Fuel**: Ensure there’s enough fuel in the tank and that it’s fresh. Stale fuel can cause starting issues.
– **Battery Inspection**: Check the battery for a good charge. Look for corrosion on terminals and ensure they’re clean and tight.
– **Fuse Check**: Inspect the fuses for any that may be blown. Replace as necessary.
– **Safety Switches**: Ensure all safety switches (e.g., seat switch, brake switch) are functioning properly.

### 2. **Engine Starts but Stalls**
– **Fuel System**: Check for clogged fuel filters or a bad fuel pump. Inspect the fuel lines for kinks or leaks.
– **Air Filter**: Inspect the air filter for dirt and debris. A clogged air filter can restrict airflow and cause stalling.
– **Spark Plug**: Check the condition of the spark plug. Clean or replace if it appears worn or dirty.

### 3. **Mower Cuts Unevenly**
– **Deck Leveling**: Ensure the mower deck is properly leveled. Adjust the height of the deck if needed.
– **Blade Condition**: Inspect mower blades for damage or dullness. Sharpen or replace blades as necessary.
– **Tire Pressure**: Check tire pressure; uneven pressure can lead to an uneven cut.

### 4. **Mower Not Engaging**
– **PTO (Power Take-Off)**: Check the PTO switch and the cables leading to the blades. Ensure the PTO is engaged and that the switch is operating correctly.
– **Belt Inspection**: Look for any worn or broken belts that may be preventing the blades from engaging. Replace as needed.

### 5. **Hydraulic Issues**
– **Fluid Levels**: Check the hydraulic fluid levels and refill if necessary.
– **Leaks**: Inspect for leaks in hydraulic hoses or connections. Tighten or replace any faulty components.

### 6. **Steering Problems**
– **Linkage Inspection**: Check the steering linkage for wear or damage. Adjust as necessary.
– **Tire Alignment**: Check the alignment of the front wheels. Misalignment can cause steering issues.

### 7. **Excessive Vibration or Noise**
– **Blade Damage**: Inspect the blades for dents or damage. Replace if necessary.
– **Loose Bolts**: Check for loose bolts or components on the mower deck and engine. Tighten any loose parts.

### General Maintenance Tips:
– **Regular Cleaning**: Keep the mower clean, including the underside of the deck to prevent grass buildup.
– **Lubrication**: Regularly lubricate moving parts as recommended in the operator’s manual.
– **Seasonal Check-Up**: Perform a thorough check at the beginning and end of mowing season to ensure everything is in good working order.

If troubleshooting does not resolve the issue, consult the operator’s manual for specific guidance or reach out to a professional technician for further assistance.

Please note that any procedure, checklist, or
other document available on Limble is provided for general education and information only and does not constitute legal,
medical, or financial advice. Limble makes the materials available AS IS and AS PROVIDED, without warranties of any
kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific
situation and agree that you are solely responsible for any such use, including compliance with applicable law and with
meeting any conditions of product warranties. It is recommended to contact OEM for the most accurate
information.

Configure and custumize to fit your needs

  • Reduce downtime

    Increase Productivity

    Prioritize and complete work orders faster with efficient, collaborative software your team will love using.

  • Compliance and audits

    Reduce Downtime

    Avoid setbacks with a proactive, preventive maintenance strategy and move fast when emergencies do happen.

  • See every work order

    World Class Support

    Limble’s support team is ready to answer any questions you have in 60 seconds or less, 24/7.

Want to see Limble in Action?

FAQs

Why are Standard Operating Procedures (SOP) Important?

SOPs ensure consistency, efficiency, and safety by providing clear guidelines for tasks. They streamline training, maintain quality, ensure compliance, and support continuous improvement and accountability.

What is CMMS?

CMMS stands for Computerized Maintenance Management System. CMMS software helps businesses manage, automate, and streamline all of their maintenance operations.

Is Limble’s CMMS Mobile Friendly?

Limble is consistently rated Easiest-to-Use CMMS on review sites like G2, Capterra, and Software Advice. And our customers agree. With our mobile CMMS app, teams experience 30%+ better productivity, on average, requiring little to no training or ramp-up time. Our CMMS app can travel with your team, no matter where they go! Visit our App Store or Google Play for more information.

Integration

Limble provides seamless, pre-built CMMS Integrations with the most widely used software systems. That means no help from a developer or your IT team is required. Learn more about our integrations.

Security

At Limble, our world-class data security practices ensure your account information is safe. We use state-of-the-art technologies and industry best practices to maintain a secure infrastructure, including SOC-II Type II certification, regular penetration testing, and continuous security training for our staff.

Request a Demo

Share your contact details below and someone from our team will reach out as soon as possible.