Product Info
The WeatherMaker 8000™ 58WAV is an upflow induced-combustion furnace available in sizes 45,000 through 155,000 Btuh input capacities. It is A.G.A./C.G.A. certified for natural and propane gas and for installation on combustible flooring, in alcoves, attics, basements, closets, or utility rooms.
Preventive Maintenance Schedule
Every 6 Months:
- Inspect blower motor and wheel for dirt buildup and proper operation
- Inspect electrical connections and tighten if necessary
Annually:
- Perform a complete inspection and service of the furnace
- Clean the heat exchanger and burners
Daily:
- Check for proper operation of safety controls
- Check burner flames
Monthly:
- Clean or replace air filters
- Inspect heat exchanger and vent system for signs of corrosion or blockage
Parts List
- Blower Motor: Provides airflow through the furnace (Part Number: Not Available)
- Induced Draft Motor: Provides combustion air and vents exhaust gases (Part Number: Not Available)
- Gas Valve: Controls gas flow to the burners (Part Number: Not Available)
- Hot Surface Ignitor: Ignites the burner flame (Part Number: Not Available)
- Flame Sensor: Senses the burner flame (Part Number: Not Available)
- Pressure Switch: Proves operation of the induced draft motor (Part Number: Not Available)
- Limit Switch: Shuts off the gas valve if the furnace overheats (Part Number: Not Available)
Product Specs Sheet
- Input Capacity: 45,000 through 155,000 Btuh
- Airflow: 800 to 1600 CFM
- Dimensions: 14-3/16 to 24-1/2 inches wide, 12-9/16 to 22-7/8 inches deep, 12-11/16 to 23 inches tall
- Shipping Weight: 122 to 204 lbs
Troubleshooting
- Furnace will not start:
- Check that the thermostat is calling for heat
- Verify the furnace is receiving power
- Check the manual reset limit switch and pressure switch
- Inspect the ignitor and flame sensor
- Furnace short cycles:
- Check for proper airflow through the furnace
- Inspect the limit switch and pressure switch
- Verify the thermostat is functioning properly
- Furnace is noisy:
- Inspect the blower wheel and motor for dirt buildup
- Check that the furnace is level and the ductwork is properly supported
- Verify the gas input rate is correct
- Furnace produces soot:
- Check the gas input rate and manifold pressure
- Inspect the burners and heat exchanger for blockages
- Ensure the furnace is receiving adequate combustion and ventilation air
Please
note that any procedure, checklist, or other document available on Limble is provided for general education and
information only and does not constitute legal, medical, or financial advice. Limble makes the materials available
AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the
risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any
such use, including compliance with applicable law and with meeting any conditions of product warranties. It is
recommended to contact OEM for the most accurate information.
8c697376-deed-4557-93fb-69f56ba059e8
Configure and custumize to fit your needs
-
Increase Productivity
Prioritize and complete work orders faster with efficient, collaborative software your team will love using.
-
Reduce Downtime
Avoid setbacks with a proactive, preventive maintenance strategy and move fast when emergencies do happen.
-
World Class Support
Limble’s support team is ready to answer any questions you have in 60 seconds or less, 24/7.
Want to see Limble in Action?
FAQs
Why are Standard Operating Procedures (SOP) Important?
SOPs ensure consistency, efficiency, and safety by providing clear guidelines for tasks. They streamline training, maintain quality, ensure compliance, and support continuous improvement and accountability.
What is CMMS?
CMMS stands for Computerized Maintenance Management System. CMMS software helps businesses manage, automate, and streamline all of their maintenance operations.
Is Limble’s CMMS Mobile Friendly?
Limble is consistently rated Easiest-to-Use CMMS on review sites like G2, Capterra, and Software Advice. And our customers agree. With our mobile CMMS app, teams experience 30%+ better productivity, on average, requiring little to no training or ramp-up time. Our CMMS app can travel with your team, no matter where they go! Visit our App Store or Google Play for more information.
Integration
Limble provides seamless, pre-built CMMS Integrations with the most widely used software systems. That means no help from a developer or your IT team is required. Learn more about our integrations.
Security
At Limble, our world-class data security practices ensure your account information is safe. We use state-of-the-art technologies and industry best practices to maintain a secure infrastructure, including SOC-II Type II certification, regular penetration testing, and continuous security training for our staff.