York TP9C Furnace Manual

CREATE FREE TEMPLATE

Product Info

The York TP9C Furnace is a high-efficiency, gas-powered heating system designed for residential use, featuring a compact design and innovative technology for optimal performance. With an AFUE (Annual Fuel Utilization Efficiency) rating of up to 96%, it effectively converts fuel into heat, helping to reduce energy costs. This model also includes a variable-speed blower for improved air circulation and comfort, and it often comes equipped with advanced control systems for enhanced reliability and convenience. Ideal for homeowners seeking a dependable heating solution, the TP9C is known for its quiet operation and durable construction. Download the Manual

Product Maintenance Schedule

Here’s a short and simple maintenance schedule for your York TP9C Furnace:

### Monthly:
1. **Check Air Filter**: Inspect and clean or replace the air filter if it’s dirty.
2. **Inspect Vents and Registers**: Ensure they are open and free from obstructions.

### Quarterly:
1. **Inspect the Blower Motor**: Ensure it’s clean and lubricate if necessary.
2. **Check Thermostat**: Test for proper operation and calibrate if needed.

### Semi-Annually (Before Heating Season):
1. **Inspect and Clean Burners**: Remove dirt or debris to ensure efficient combustion.
2. **Inspect Heat Exchanger**: Look for signs of corrosion or cracks.
3. **Test Safety Controls**: Make sure all safety systems are functioning correctly.

### Annually:
1. **Professional Inspection**: Schedule a full maintenance check with a qualified technician.
2. **Inspect Ductwork**: Check for leaks or blockages.
3. **Perform Combustion Analysis**: Ensure the furnace is operating efficiently.

### Seasonal:
1. **Check Carbon Monoxide Detectors**: Ensure they are functioning properly and replace batteries if needed.

By following this schedule, you can help ensure that your York TP9C Furnace operates efficiently and lasts longer.

Product Specs Sheet

The York TP9C furnace is a high-efficiency gas furnace designed for residential heating. Below are the key specifications and features typically associated with this model:

### Product Specifications:

– **Model:** York TP9C
– **Type:** Gas Furnace (Condensing)
– **Efficiency Rating:** Up to 95% AFUE (Annual Fuel Utilization Efficiency)
– **Heating Capacity:** Available in multiple BTU capacities (e.g., 40,000 to 120,000 BTU)
– **Blower Type:** Variable speed
– **Heat Exchanger:** Secondary stainless steel heat exchanger
– **Ignition Type:** Electronic ignition
– **Fuel Type:** Natural Gas or Propane (LP)

### Features:

– **Quiet Operation:** Designed for low noise levels, making it suitable for residential applications.
– **Durability:** Equipped with a durable cabinet and high-quality components to ensure longevity.
– **Energy Efficiency:** High AFUE rating helps reduce energy consumption and lower utility bills.
– **Flexibility:** Compatible with a variety of home configurations and heating needs.
– **Enhanced Comfort:** Variable-speed blower provides consistent airflow and temperature control.
– **Smart Technology:** Can be integrated with smart thermostats for optimized heating control.

### Dimensions:

– **Cabinet Size:** Commonly available in 14” or 17” widths depending on the capacity.
– **Height:** Typically ranges from 33” to 36”, depending on the model.
– **Depth:** Usually around 28” or more.

### Installation and Maintenance:

– **Installation Type:** Upflow, downflow, or horizontal configurations.
– **Maintenance:** Recommended annual maintenance checks to ensure optimal performance and efficiency.

### Warranty:

– **Heat Exchanger Warranty:** Usually limited lifetime warranty.
– **Parts Warranty:** Typically 10 years, but confirm with the manufacturer for specifics.

For the most accurate and specific details, including installation requirements and additional features, it is best to consult the official product documentation or the manufacturer’s website.

Product Diagram

For a York TP9C furnace, several common parts may be needed for maintenance or replacement. While specific part numbers can vary based on the model year and configuration, here are some typical components you might encounter along with commonly referenced part numbers:

1. **Flame Sensor** – Part Number: 031-00208-000
2. **Ignitor** – Part Number: 031-00212-000
3. **Limit Switch** – Part Number: 031-00689-000
4. **Blower Motor** – Part Number: 031-00374-000
5. **Control Board** – Part Number: 031-00274-000
6. **Gas Valve** – Part Number: 031-00241-000
7. **Transformer** – Part Number: 031-00279-000
8. **Draft Inducer Motor** – Part Number: 031-00231-000
9. **Air Filter** – Size and part numbers may vary; check the owner’s manual for specifics.
10. **Burner Assembly** – Part Number: 031-00277-000

It’s advisable to verify the part numbers with a specific model number, as variations may exist. Always consult the furnace’s service manual for detailed parts information and installation instructions.

Product Troubleshooting

Troubleshooting a York TP9C furnace involves several steps to identify and resolve the issue. Here’s a systematic approach you can follow:

### 1. **Safety First**
– Turn off the power to the furnace at the circuit breaker.
– Shut off the gas supply if applicable.

### 2. **Check the Thermostat**
– Ensure that the thermostat is set to “Heat” and the desired temperature is above the current room temperature.
– Check the batteries in the thermostat if applicable and replace them if necessary.

### 3. **Inspect the Air Filter**
– A clogged air filter can restrict airflow and cause the furnace to shut down. Check the filter and replace it if it’s dirty.

### 4. **Check the Circuit Breaker**
– Make sure the circuit breaker for the furnace is on. If it’s tripped, reset it and see if the furnace turns on.

### 5. **Look for Error Codes**
– If the furnace has a display, check for any error codes that indicate the problem. Consult the owner’s manual for code meanings.

### 6. **Examine the Blower Motor**
– Listen for the blower motor operation. If it’s not running, ensure the blower door is securely closed, and examine the motor for any visible issues.

### 7. **Check the Flame Sensor**
– A dirty flame sensor can prevent ignition. Gently clean the flame sensor with fine sandpaper or a cloth.

### 8. **Inspect Gas Supply**
– Ensure that the gas valve is open. If the furnace uses propane or natural gas, check that there are no leaks or obstructions in the gas line.

### 9. **Reset the Furnace**
– Some models have a reset button, usually located on the control board. If you’ve done some basic checks, try resetting the furnace.

### 10. **Examine Ductwork and Vents**
– Ensure that all supply and return vents are open and not blocked by furniture or other items.
– Inspect the ductwork for any visible damage or disconnections.

### 11. **Test Safety Features**
– Check for any safety features like limit switches or airflow sensors that may have tripped. Reset if needed, but ensure the underlying issue is resolved.

### 12. **Professional Help**
– If you’ve gone through these steps and the furnace still isn’t operational, it may be time to contact a licensed HVAC professional to diagnose and repair more complex issues.

### Additional Tips
– Keep the area around the furnace clean and free of clutter.
– Regular maintenance, including annual professional servicing, can help prevent issues from arising.

By following these steps, you should be able to troubleshoot common issues with your York TP9C furnace effectively.

Please note that any procedure, checklist, or
other document available on Limble is provided for general education and information only and does not constitute legal,
medical, or financial advice. Limble makes the materials available AS IS and AS PROVIDED, without warranties of any
kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific
situation and agree that you are solely responsible for any such use, including compliance with applicable law and with
meeting any conditions of product warranties. It is recommended to contact OEM for the most accurate
information.

Configure and custumize to fit your needs

  • Reduce downtime

    Increase Productivity

    Prioritize and complete work orders faster with efficient, collaborative software your team will love using.

  • Compliance and audits

    Reduce Downtime

    Avoid setbacks with a proactive, preventive maintenance strategy and move fast when emergencies do happen.

  • See every work order

    World Class Support

    Limble’s support team is ready to answer any questions you have in 60 seconds or less, 24/7.

Want to see Limble in Action?

FAQs

Why are Standard Operating Procedures (SOP) Important?

SOPs ensure consistency, efficiency, and safety by providing clear guidelines for tasks. They streamline training, maintain quality, ensure compliance, and support continuous improvement and accountability.

What is CMMS?

CMMS stands for Computerized Maintenance Management System. CMMS software helps businesses manage, automate, and streamline all of their maintenance operations.

Is Limble’s CMMS Mobile Friendly?

Limble is consistently rated Easiest-to-Use CMMS on review sites like G2, Capterra, and Software Advice. And our customers agree. With our mobile CMMS app, teams experience 30%+ better productivity, on average, requiring little to no training or ramp-up time. Our CMMS app can travel with your team, no matter where they go! Visit our App Store or Google Play for more information.

Integration

Limble provides seamless, pre-built CMMS Integrations with the most widely used software systems. That means no help from a developer or your IT team is required. Learn more about our integrations.

Security

At Limble, our world-class data security practices ensure your account information is safe. We use state-of-the-art technologies and industry best practices to maintain a secure infrastructure, including SOC-II Type II certification, regular penetration testing, and continuous security training for our staff.

Request a Demo

Share your contact details below and someone from our team will reach out as soon as possible.