Product Info
The 416XT is a Wheel Horse garden tractor model with a 72200 model number and serial numbers starting at 230000001 and up. It is a riding mower with various controls and features to operate the tractor and attachments.
Preventive Maintenance Schedule
Daily:
- Check oil level
- Check safety system
- Check brake
- Clean air intake screen
- Check battery electrolyte
- Check air cleaner
Every 50 Hours:
- Check belts for wear/cracks
Every 200 Hours:
- Check spark plug(s)
- Change oil filter
After Storage:
- Check spark plug(s)
- Check battery electrolyte
- Check tire pressure
Before Storage:
- Drain gasoline
- Paint chipped surfaces
- Charge battery and disconnect cables
- Check front wheel toe-in
- Check safety system
- Check brake
Every 25 Hours:
- Service foam air cleaner
- Check tire pressure
- Grease chassis
Every 100 Hours:
- Change oil
- Replace fuel filter
- Clean outside of engine
- Replace paper air cleaner
Parts List
- Bolt, 1/4 x 3/4 inch: Used for activating and installing the battery (Part Number: Not Available)
- Hex Nut, 1/4 inch: Used for activating and installing the battery (Part Number: Not Available)
- Key: Used in the ignition switch (Part Number: Not Available)
- Operator’s Manual: Provides instructions for operating the tractor (Part Number: Not Available)
- Riding Mower Safety Video: Provides safety information for operating the tractor (Part Number: Not Available)
Product Specs Sheet
- Tire Pressure: 20 psi (138 kPa) for front and rear tires
- Battery: 12 v, 260 Cold Cranking Amps
- Spark Plug: Champion RC12YC (or equivalent), Air Gap: 0.030 inch (0.76 mm)
- Fuel Tank: Unleaded regular gasoline, 85 pump octane minimum
- Engine Oil: Detergent oil (API service SG, SH, SJ, or higher), Viscosity: 10W-30
- Engine Oil Capacity: w/filter, 64 oz. (1.9 l)
Troubleshooting
- Starter does not crank:
- Move blade control (PTO) to DISENGAGED
- Set parking brake
- Sit on the seat
- Charge the battery
- Check electrical connections for good contact
- Replace fuse
- Contact Authorized Service Dealer
- Engine will not start, starts hard, or fails to keep running:
- Fill fuel tank with gasoline
- Move choke lever to On
- Clean or replace air cleaner element
- Install wire on spark plug
- Install new, correctly gapped spark plug
- Replace fuel filter
- Contact Authorized Service Dealer
- Engine loses power:
- Reduce ground speed
- Clean air cleaner element
- Add oil to crankcase
- Remove obstruction from cooling fins and air passages
- Install new, correctly gapped spark plug
- Clean or replace the fuel cap
- Replace fuel filter
- Contact Authorized Service Dealer
- Engine overheats:
- Reduce ground speed
- Add oil to crankcase
- Remove obstruction from cooling fins and air passages
- Abnormal vibration:
- Tighten engine mounting bolts
- Tighten the appropriate pulley
- Contact Authorized Service Dealer
- Machine does not drive:
- Move drive control to the operate position
- Contact Authorized Service Dealer
Please
note that any procedure, checklist, or other document available on Limble is provided for general education and
information only and does not constitute legal, medical, or financial advice. Limble makes the materials available
AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the
risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any
such use, including compliance with applicable law and with meeting any conditions of product warranties. It is
recommended to contact OEM for the most accurate information.
82772ace-cc4d-44e2-a7b7-83a7d380be16
Configure and custumize to fit your needs
-
Increase Productivity
Prioritize and complete work orders faster with efficient, collaborative software your team will love using.
-
Reduce Downtime
Avoid setbacks with a proactive, preventive maintenance strategy and move fast when emergencies do happen.
-
World Class Support
Limble’s support team is ready to answer any questions you have in 60 seconds or less, 24/7.
Want to see Limble in Action?
FAQs
Why are Standard Operating Procedures (SOP) Important?
SOPs ensure consistency, efficiency, and safety by providing clear guidelines for tasks. They streamline training, maintain quality, ensure compliance, and support continuous improvement and accountability.
What is CMMS?
CMMS stands for Computerized Maintenance Management System. CMMS software helps businesses manage, automate, and streamline all of their maintenance operations.
Is Limble’s CMMS Mobile Friendly?
Limble is consistently rated Easiest-to-Use CMMS on review sites like G2, Capterra, and Software Advice. And our customers agree. With our mobile CMMS app, teams experience 30%+ better productivity, on average, requiring little to no training or ramp-up time. Our CMMS app can travel with your team, no matter where they go! Visit our App Store or Google Play for more information.
Integration
Limble provides seamless, pre-built CMMS Integrations with the most widely used software systems. That means no help from a developer or your IT team is required. Learn more about our integrations.
Security
At Limble, our world-class data security practices ensure your account information is safe. We use state-of-the-art technologies and industry best practices to maintain a secure infrastructure, including SOC-II Type II certification, regular penetration testing, and continuous security training for our staff.